The new Renesas RX66N and RX72N high-performance MCU families offer the highest integration of fast 120 MHz-Flash and SRAM memory and peripheral function The new Renesas RX66N and RX72N high-performance MCU families offer the highest integration of fast 120 MHz-Flash and SRAM memory and peripheral functions. Up to 4 MB of Flash and 1 MB […]
RENESAS RX66N AND RX72N MCU FAMILIES Read More »
The L6983 is an easy to use synchronous monolithic step-down regulator capable of delivering up to 3 A DC to the load. The wide input voltage range makes the device suitable for a broad range of applications. The L6983 is based on a peak current mode architecture and is packaged in a QFN16 3×3 with
L6983 – 38V 3A SYNCHRONOUS STEP-DOWN CONVERTER WITH 17UA QUIESCENT CURRENT Read More »
Flex Power Modules’ converters are first generation direct conversion products Flex Power Modules’ BMR481 DC/DC converter addresses the growing need for higher energy efficiency levels in datacenters and cloud computing infrastructures. This converter offers an input range of 40 V to 60 V targeting 48 V to 54 V nominal supplies and a programmable 0.5 V to 1.35 V output. The 12 mm
BMR481 48 V-TO-LOAD DIRECT CONVERSION DC/DC CONVERTERS Read More »
STMicroelectronics’ step-down converter is an easy to use synchronous monolithic step-down regulator STMicroelectronics L6983 Synchronous Step-Down Converter is an easy to use monolithic step-down regulator capable of delivering up to 3A DC to the load. The wide input voltage range makes the device suitable for a broad range of applications. The L6983 is based on a peak
L6983 38 V STEP-DOWN CONVERTER IS A SYNCHRONOUS MONOLITHIC STEP-DOWN REGULATOR Read More »
Engineers can shrink their power solution by as much as 80% and maximize efficiency in high-voltage industrial applications with a new high-density, isolated DC/DC bias power supply. Texas Instruments (TI) introduced the first integrated circuit (IC) developed with a new proprietary integrated transformer technology: a 500-mW high-efficiency isolated DC/DC converter with the industry’s lowest electromagnetic interference (EMI), the UCC12050.
Acromag adds another military-grade measurement and control module to its AcroPack series of ruggedized mini PCIe I/O modules. The new AP730 multi-function I/O module performs analog input, analog output, discrete I/O and counter/timer functions. A variety of carrier cards can host up to four modules and are available in PCIe, VPX, XMC, CompactPCI-Serial, and mini-ITX
ACROMAG COMBINES A/D, D/A, DIGITAL I/O AND COUNTER/TIMER CHANNELS ON ACROPACK Read More »
GaN Systems and ON Semiconductor announced the availability of the NCP13992UHD300WGEVB, the world’s highest power density 300W ac-dc adapter reference design using GaN Systems’ 650V, 15A gallium-nitride (GaN) E-HEMTs and multiple ON Semiconductor controller and driver ICs, including the NCP51820, NCP13992, NCP1616, and NCP4306. This complete system reference design is a highly versatile and low cost, allowing designers to
300W GAN-BASED ULTRA-HIGH POWER DENSITY AC-DC ADAPTER REFERENCE DESIGN Read More »
Maxim’s MAX20075 mini buck converter helping improve automotive ECU design with a low-Iq buck converter. The MAX20075/MAX20076/MAX25276 are small, synchronous buck converters with integrated high-side and low-side switches. The MAX20076/MAX25276 are designed to deliver up to 1.2A and the MAX20075 up to 0.6A, with 3.5V to 36V input voltages. The devices provide an accurate output
MAX20075 MINI BUCK CONVERTER Read More »
The MAXREFDES111# reference design from Maxim Integrated is a compact 24V input flyback-converter module that features 5V at 400mA output. Transformer selection is often the most difficult step in isolated power design. Multiple transformers (Wurth Electronics 750315847, HanRun HR041087, and Sumida 06343-T588) have been qualified for this design, simplifying the process of transformer selection. The reference design delivers a
ISOLATED 2W 24VDC-TO-5VDC FLYBACK DC-DC – REFERENCE DESIGN Read More »
Device communication is done in two ways: parallel and serial. In the parallel mode, data transfer is fast and uses more number of lines. This mode is good for short range data transfer. But, Serial communication uses only one or two data lines to transfer data and is generally used for long distance communication. In
MICROCONTROLLER to PC Communication Via PL2303 (USB TO UART TTL) Converter Read More »
