Hello, “Multimeter” was the only title that first came to my mind to. Voltmeter (positive DC voltage) from 0.00 to 9.99 V and 10.0 – 30.0 V with automatic range switching. Frequency counter 0… Electronics Projects,Atmel Atmega8 Multimeter Circuit (led display) “atmega8 projects, avr project, microcontroller projects, “ Hello, “Multimeter” was the only title that first came to […]
Pretty stylish digital clock circuit of the display to show information on the hours, but around kılasik made with 120 LEDs in display attracts attention also has an alarm feature. Microprocessor AT89C2051 LED clock…Electronics Projects, Atmel AT89C2051 Clock Circuit with LED Display “avr project, led projects, microcontroller projects, “ MICROPROCESSOR AT89C2051 LED CLOCK WITH ALARM The clock is
Sold in the market potency heat settings with TRIAC 220v temperature-controlled soldering iron more advanced version control AT89C2051 microcontroller is provided by heat setting 2 button is made with indicators, one for led display… Electronics Projects, 220V Soldering Iron Temperature Control with AT89C2051 LED Display “avr project, microcontroller projects, “ Sold in the market potency heat settings with TRIAC
220V SOLDERING IRON TEMPERATURE CONTROL WITH AT89C2051 LED DISPLAY Read More »
Abstract: This article is how-to guide, intended as a quick learning aid for engineers considering using the MAX6954 to drive 14-segment monocolor LEDs. The MAX6954 is a versatile display driver, capable of controlling a mix of discrete, 7-segment, 14-segment, and 16-segment LED displays through a serial interface. This application note shows a typical application and configuration
This (SPI7SEGDISP4.40-1R) is a revised version of the previous SPI seven segment LED display (4 digit) board that displayed numerals and decimal points. The new version has a better quality seven segment LED display (LTC-4727JS) with three extra LED segments, as shown below. The additional colon segments are useful in projects where you need to display
New version of MAX7219 based 4-digit serial seven segment LED display Read More »
The 4×4 LED Display was my first project with a two-layer circuitboard layout. The alignment was not 100% optimal, but sufficent. I wanted to make the board as small as possible, so the parts had to be stacked at some places. The square LED’s were painted black on the sides to keep the pixels sharp.
