led

Lux meters attiny26-16 light measurement circuit using attiny26 microcontroller

AVR ATmega Projects / Ibrar Ayyub

Lux meter circuit atmel attiny26-16 microcontroller based on the value of the LED displays on the display lux with LEDs placed on 2sk1061 MOSFETs. Interestingly, all of the source files in an application (pcb, diagrams, code) calibration circuit is shared also provided information to  Lux meter circuit diagram: The Lux Meter is usually used to measure illumination. The illumination is how […]

Lux meters attiny26-16 light measurement circuit using attiny26 microcontroller Read More »

LCD Car Accelerometer using microcontroller

LCD Car Accelerometer using microcontroller

AVR ATmega Projects, LCD Projects, Sensor - Transducer - Detector Projects / Ibrar Ayyub

Introduction The circuit is drawn for measurement of acceleration from  –1000 mg until + 1000 mg. It can be placed in kantra’n the car and be supplied from the sheath of electric lighter. The circuit includes one indicative LED and a screen LCD. Description The measurement of acceleration becomes with the use of IC from

LCD Car Accelerometer using microcontroller Read More »

RCEN fuse programmer using AT90S1200A microcontroller

RCEN fuse programmer using AT90S1200A microcontroller

AVR ATmega Projects / Ibrar Ayyub

Introduction: As you know the AT90S1200 microcontroller includes an internal RC oscillator that is disabled by default. If you want to change it (enable or disable) you must to program it with parallel mode. The most programmers work on serial mode that is not possible to program this fuse bit (RCEN). With this stand-alone programmer you can enable

RCEN fuse programmer using AT90S1200A microcontroller Read More »

80×32 LED matrix display using ATmega32 microcontroller

AVR ATmega Projects, LED Projects / Ibrar Ayyub

The LEDMATRIX interface News: Now with lcd4linux driver I recently purchased 10 SLM1608 (SLM1606) LED matrix display units from Ebay (you might also contact the seller directly at [email protected]). These are 16×16 LED matrix units with a green and a red LED per pixel allowing each pixel to be switched to either green, red, amber

80×32 LED matrix display using ATmega32 microcontroller Read More »

i2c interface to USB interface using attiny45 microcontroller

AVR ATmega Projects, Interfacing(USB - RS232 - I2c -ISP) Projects / Ibrar Ayyub

Attach any I2C client chip (thermo sensors, AD converter, displays, relais driver, …) to your PC via USB … quick, easy and cheap! Drivers for Linux, Windows and MacOS available. The i2c-tiny-usb project is an open source/open hardware project. The goal of i2c-tiny-usb is to provide a cheap generic i2c interface to be attached to

i2c interface to USB interface using attiny45 microcontroller Read More »

Acceleration sensing USB interface using Atmega8 microcontroller

AVR ATmega Projects, Sensor - Transducer - Detector Projects / Ibrar Ayyub

Contents The hardware The USB interface Calibration PC assisted calibration Self calibration Software Drivers Joystick drivers Maemo drivers The input event subsystem Setting permissions Enigma FAQ Downloads The TiltStick is a small acceleration sensing device in form of a USB stick. It’s using a two axis acceleration sensor to measure acceleration (caused e.g. by motion

Acceleration sensing USB interface using Atmega8 microcontroller Read More »

Scroll to Top