About: Ibrar Ayyub

This project is used to measure the distance using ultrasonic sensors. The ultrasonic signal passes through the atmosphere to a barrier, which we want to measure the distance. Part of this signal is reflected and travels back to the receiver. The time delay between sending and receiving signals are then determined by distance barriers. The […]

Boisbriand, Quebec (PRWEB) December 24, 2008 RobotShop, the World’s Leading Source for Domestic and Professional Robot Technology, unleashes the RobotShop Robot Rover, the first ever development platform for the Arduino USB microcontroller. The RobotShop Robot Rover, which was designed in-house by the RobotShop Learning Center, is a low cost and versatile platform for robot hobbyists, […]

The 4×4 LED Display was my first project with a two-layer circuitboard layout. The alignment was not 100% optimal, but sufficent. I wanted to make the board as small as possible, so the parts had to be stacked at some places. The square LED’s were painted black on the sides to keep the pixels sharp. […]

Aim of this project is to present a way to store a large quantity of data into microSD card in files with FAT32 format. Here, ATmega32 is used for data collection and microSD interface. The data is received from in-build 8-channel ADC of ATmega32. One channel is used for reading temperature from LM35 sensor and […]

Manufacturing circuitboards containing SMD-parts with toner-transfer is nearly impossible. The thin traces almost never get transferred completely to the copper. One solution to this problem is to use photoresist boards and expose them with UV light. The layout is printed onto a transparency, which is then used as a mask for the photoresist. I got […]

West Chicago, IL (PRWEB) April 11, 2012 Sims Recycling Solutions, the global leader in electronics reuse and recycling, will host a free electronics recycling event to encourage the community to recycle their electronics. All items brought for recycling will be safely and responsibly recycled by Sims Recycling Solutions. The event will be held on April […]

For a long time I had a layout for this circuit, but could never build it, because the layout was to small to be made by tonertransfer. So it was the first layout I made with my new exposure unit. It’s quite small, so it fits under the LEDMatrix itself. Therefore only SMD parts are […]

I am presenting one application with the Nokia 3310 LCD: Designing a thermometer using DS1621 temperature sensor IC. DS1621 is 8-pin sensor from Maxim, with temp range of -55 to +125 degree C, which can be interfaced with microcontroller over two-wire serial i2c bus. It has operating voltage range from 2.7 to 5.5v. I’m operating […]

Due to university and work it has been a while since the last post. But I just completed a little project that’s worth posting. Several old 27C256 EPROMS were lying around unused. So I thought about a purpose for them. As I also had some 8×8 LED matrices, a little animated display came to mind. […]

Costa Mesa, CA (PRWEB) May 21, 2012 TROY Group, Inc., a Worldwide Leader in Secure on-Demand Printing Solutions, announces the TROY 601, 602 & 603 SecureRx Printers, the latest addition to TROYs line of Secure Prescription Printing Solutions.   Based on the latest HP LaserJet M600 Series, the TROY 600 Series SecureRx Printers provide print […]