About: Ibrar Ayyub
Posts by Ibrar Ayyub:
ATMega328 Board
Posted on: 07 Dec 2017
The ATMega328 board is a microcontroller board based on the ATmega328, The board contains everything needed to support the microcontroller. The board need 5VDC to power it. Simply connect the power connector to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. You can program it with the […]
Build Your Own Cheap Antenna Analyser
Posted on: 07 Dec 2017
Ham radio is the use of radio frequency spectrum for purposes of non-commercial exchange of messages, wireless experimentation, self-training, etc. Developing a ham radio project may requires using an antenna analyser, a device that is used for measuring input frequency and impedance. There are many types of antenna analysers such as Anritsu VNA Master, RigExpert, […]
ATTiny 2313 BOARD
Posted on: 06 Dec 2017
his board is a development board on which you can build your projects. It is suited for educational use, experiments or prototyping. The board uses the ATTiny2313 microcontroller with a 20Mhz clock. The board contains the ISP 10-pin connector for in circuit serial programming. It has also a push button reset switch. It has 15 […]
€15 IoT Geiger Counter using ESP8266
Posted on: 06 Dec 2017
Geiger counters are devices used to detect radioactive emissions, most commonly beta particles and gamma rays. The counter consists of a tube filled with an inert gas that becomes conductive of electricity when it is impacted by a high-energy particle. The Geiger–Müller tube or G–M tube is the sensing element of the Geiger counter instrument […]
LED Mood light
Posted on: 05 Dec 2017
In this projects 8 different colors are displayed with the use of a RGB LED. The microcontroller that is used is the ATMega8. An RGB LED is a LED which has three LED’s integrated in one packaging. These LED’s have the colors red, green, and blue. Such a LED costs about 1 Euro. With these […]
TE0722 Zynq DIPFORTy1 “Soft Propeller” Module
Posted on: 05 Dec 2017
The DIPFORTy1 is a powerful Xilinx based FPGA board with small form factor and many programmable I/Os. It is popular for its high performance at most competitive price. Introduction: The TE0722 is based on the Xilinx Zynq-7000, a System on Chip. It contains a FPGA and a Dual Core ARM A9+ processor with enough logic […]
servo motor controller
Posted on: 04 Dec 2017
In ths project you can learn how to build a servo controleer motor with the ATMEGA328 board. The position of the servo motor is controlled by the software (sweep back and forth) or by a potentiometer. The position of the servo motor is set by the length of a pulse. The servo expects to receive […]
Turn your Zero Pi into a USB Dongle
Posted on: 04 Dec 2017
The $5 Raspberry Pi Zero is a standalone computer that can be embedded in various applications, but maybe now it is time to add some extra features. It comes with a USB OTG port, meaning it can function as a USB device rather than a USB host. Thus, it can become a serial device with […]
ATMega644 Board
Posted on: 03 Dec 2017
The ATMega644 board is a microcontroller board based on the ATmega644, The board contains everything needed to support the microcontroller. The board needs 5VDC to power it. Simply connect the power connector to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. You can program it with the […]
Water Tank Overflow Alarm System Using ESP8266
Posted on: 03 Dec 2017
Sometimes the float valve of a water tank may not work properly causing water to overflow and spread across the floor. Peter Jennings faced this problem in his storage area, and he had developed an alarm device to notify him when the water exceeds its normal range. Peter’s project includes a simple water sensor and […]