This ATmega168-based digital comb filter built to clean a realtime audio signal. It can remove the ubiquitous 60Hz (50Hz in some countries) hum noise caused by power lines and household electrical wiring. Since the noise is not strictly sinusoidal it is necessary to remove all harmonics of 60Hz, and that is what this filter does. […]
AVR Digital Hum Nuller using ATmega168 microcontroller Read More »
The ATtiny2313-based project is an experiment on the closed loop DC servomotor control system (SMC) by Elm Chan. It can be used for practical use with/without some modifications. The closed loop servo mechanism requires real-time servo operations, such as position control, velocity control and torque control. It will be suitable for implementation to any embedded
DC Servomotor Controller System Meter using ATtiny2313 microcontroller Read More »
This little instrument, named as Pico C, can be used to measure capacitances down to fractions of a picofarad. It built based on ATtiny2313 microcontroller. It has range: <1 pF to 2000 pF (guaranteed); 2500 pF possible and resolution: 0.1 pF. To read the result, this low cost C meter comes with 2 lines LCD.
Low Picofarad Capacitance Meter ATtiny2313 microcontroller Read More »
The goal of project is to helps people develop the musical skills of perfect pitch and relative pitch. Push buttons allow the user to navigate a graphical user interface (GUI) on a liquid crystal display (LCD). In perfect pitch training mode, a note is played and the user tries to identify the note on an
Ear Trainer using ATMega644 microcontroller Read More »
This project shows you how to store data into microSD card in files with FAT32 format using microcontroller AVR ATmega32. The MCU receives sensor’s data through internal ADC. You can connect up to 8 different sensors to the system. In this project, Dharmani uses one channel to read temperature value from LM35 sensor and remain
AVR Data Logger with MicroSD using ATmega32 microcontroller Read More »
AVR Code Debugger is useful tool to help you debug code without require resource in the MCU you are debugging. It only use 1 I/O pin, and is connected to a serial port from the host PC. Using a VT100 terminal to capture the output from the Debug tool, all of the debug information can
AVR Code Debugger using AVR microcontroller Read More »
The Electric Eel Wheel is a smart electric spinning wheel which helps you spinning the fiber of your choice into yarn easily instead of traditional wheel. This Electric spinner is lighter and smaller, making it easier to take your spinning with you. You can control spinning speed and its direction, forward or reverse. The electronics
Electric Spinning Wheel using ATmega8 microcontroller Read More »
This ATMega168-based battery tester allows you to find out the overall capacity of the rechargeable battery. It can shows how long will a battery last from the time it’s fully charged to the time that the “low battery” indicator comes on your device. It can be used to test multiple cells individually, and display the
Atmega Rechargeable Battery Capacity Tester using ATMega168 microcontroller Read More »
The project allows you to analyze characteristics of unknown/junk battery especially the capacity and variation of the voltage on discharge. It is controlled with a PC via a serial port. No external power supply is required because it is powered by RS-232C signals. It uses ATmega48 as main controller for dummy load and constant current
Simple Automatic Battery Discharge Analyzer using ATmega48 microcontroller Read More »
The Security Keypad Lock Project is a basic access control system based on ATtiny2313. It can be modified to protect just about anything. The “Code Lock” ability will allow the rightful user to deploy the platform to any property that requires simple password-protection. The “AVR” RISC microcontroller used ensures low costs. Possible applications may include:
AVR Security Keypad Lock using ATtiny2313 microcontroller Read More »
