Description This small thermometer board uses the Microchip TCN75 device. It is a cheaper clone of the LM75, it costs about 2,50 Euro. The TCN75 comes in a SO8 packaging. The TCN75 is a serially programmable temperature sensor. It has an output that is programmable as either a simple comparator for thermostat operation or as […]
LCD Thermometer TCN75 Using ATTiny2313 Read More »
Description This board can directly connected to the STK 500 board or the ATTiny2313 ISP program board with a 10 pole flatcable on the 10 pin header of the STK500 and the 10 pin header of the LCD/Switch board. The display has 16*2 character positions and is Hitachi HD44780 compatible, and also has a LED
LCD Interface Board Using ATTiny2313 Read More »
Description This board is a small controller board on which you can build your projects. It is suited for educational use, experiments or prototyping. The board uses the AT2313 microcontroller with a 10Mhz crystal. The board contains the ISP 10-pin connector for in circuit serial programming. It has also a push button reset switch for
ATTiny2313 Board RS232 Read More »
Dice are fun. Polyhedral dice used in D & D are even more fun, particularly in big handfuls of different sizes. But a handful isn’t always practical. Ever since I saw the dragon bone electronic die wand advertised in the back pages of Dragon magazine when I was a kid, I wanted an electronic device
Using AtTiny2313 microcontroller Build an electronic polyhedral die Read More »
Description With this small board you can program most of the AVR ATTiny microcontrollers or you can build your projects to use it in a stand alone application. It can be powered with a 9V battery because it has 5V voltage regulator on it. The voltage regulator can give 1000mA current. The power to the
ATTiny Board For AVR ATTiny microcontrollers Read More »
