Useful as a transmitter tune-up meter or an RF sniffer, this is an RF field strength indicator that is loosely based on the Broad Band RF Field Strength Probe, described elsewhere. It detects RF via a square law detector, basically its a crystal set with gain. For more detail: AVR LED RF Field Strength using […]
AVR LED RF Field Strength using microcontroller Read More »
This technique uses digital I/O pins to multiplex analog voltages into an analog input on the microcontroller. The method is most suitable for signals that do not need to be sampled frequently and it may be extended to accommodate a large number of inputs, though for a large number of inputs, the use of a
Analog Multiplexer using AVR microcontroller Read More »
Described are the waveform capture method, example firmware and hardware designs. This material formed the basis of an article that was first published in the October, 2003 issue of Circuit Cellar magazine. The only components added to the operating Atmel AT90S2313 circuit (one capacitor and two resistors) to allow waveform sampling with < 1 microsecond resolution
PWM Waveform Capture using AVR microcontroller Read More »
Downloads: Assembler source deco030511C.asm AVR Studio hex file is deco030511C.hex Overview This circuit employs a synchronous demodulator to separate a 1 KHz signal from noise and measures the amplitude of the 1 kHz signals once a second at about 60 microvolts per count then sends the measurements via an RS-232 interface for further
1 KHz Synchronous Detector using AVR microcontroller Read More »
The assembly code given here was written to see what it would take to make an AT90S1200 generate 8 channels of proper PWM. In this case, by proper, I mean with the maximum high frequency content consistent with the needed duty cycle and give clock. Take a look at the scope shots below and notice
8 Channel PWM using AVR microcontroller Read More »
Digital Capacitance Meter This is a simple capacitance meter which can measure capacitance value easy. There are some measurement methods for capacitance, at one time the capacitance was measured with a impedance bridge or a dip meter. Recently typical capacitance meters can measure capacitance and some additional characteristics from current vector by applying AC voltage
Capacitance Meter using AVR microcontroller Read More »
I collected a lot of site in the internet for various atmel avr projects will not work with the idea of a day’s archive is a grown up pretty. Atmel will be a solid resource for people interested in the firm. Atmel AVR Project Circuit Archive; Part-1: atmel-archive. part1 Part 2: atmel-archive. part2 # Generated by Directory Lister
Atmel Avr Project Circuit Archive 360 MB using ATmega8 microcontroller Read More »
Universal Counter The frequency counter is the most popular instrument in the home maid instruments. I think that the reason why it is built widely is: it can be built easily because it is digital circuit, it is generic measurement and many construction kits are available. Many electronics hobbyists will experienced to build any frequency
Frequency counter using AVR microcontroller Read More »
Here is some experimental hardware and software to transmit and receive AX.25 packets. It is essentially a PIC-E clone designed around a Atmel AT90S2313 with a few extra bells and whistles. I had picked up a couple of MXCOM MX-614s at the TAPR display (I also joined TAPR) at the Dayton Hamvention, and I needed
Packet Radio using AVR microcontroller Read More »
description (hardware) Above and below you can see the terminal. The LCD display is represented by the connector X1. It has a HD44780 compatible LCD controller and I’m using the 4-bit interface to send data to the LCD controller. The LED’s are multiplexed. I’ve seen the circuit somewhere in the web. It is possible to
AVR terminal for serial port using TSOP1738 microcontroller Read More »
