Step 1: The Beginning Last week I decided to make a classic Arduino clone with an ATMEGA328P-PU. I seemed to be so easy and quick but a very bad surprise for me: I odered the cheaper ATMEGA328-PU (non P!!) that is to say: non pico power. The difference: this IC needs a bit more energy […]
ARDUINO CLONE With ATMEGA328-PU Non P Read More »
I was trying to figure out what game would work well on a 5×5 LED array like the Micro:Bit has, and came across Lights Out. The idea is very simple: you start with a pattern of lights on a 5×5 grid, and you select a point on the grid. When the point is selected, the
Lights Out Clone for Micro:Bit in Tinkercad Read More »
What a “PICkit 3 clone” is, and is not There are two different things people mean by this phrase, and confusing them wastes a lot of time. A PICkit 2 clone. The PICkit 2 design was published: schematic and firmware are available, and the firmware runs on a PIC18F2550 with a 20 MHz crystal, talking
Making A Pickit 3 Clone Read More »
DESCRIPTION This project is to make a clone of Arduino Leonardo in a simple way.That is why the distribution of the pin does not match the standard Arduino (have to make many jumpers on the motherboard or use both sides). However, most Arduino Leonardo characteristics are maintained. The circuit is protected by an automatic reset fuse
Leonardo Arduino clone a single-sided PCB using ATmega32U4 Read More »
