Sensor

PRESSURE TRANSDUCER SERIES FROM MERIT SENSOR

PRESSURE TRANSDUCER SERIES FROM MERIT SENSOR

The TR pcb mountable pressure transducer series from Merit SensorTM is a rugged, direct-media pressure monitoring solution designed for today’s toughest pressure sensing environments. This pressure transducer series offers a pressure range from 15psi to 500psi with a fully compensated amplified output. The TR series from Merit SensorTM is designed for air, liquid and gas harsh media

PRESSURE TRANSDUCER SERIES FROM MERIT SENSOR Read More »

J.FLEX A LITHIUM ION BATTERY THAT IS FLEXIBLE 1

J.FLEX, A LITHIUM-ION BATTERY THAT IS FLEXIBLE

A Busan-based company has been developing J.Flex, an advanced lithium-ion battery that is ultra-thin, flexible, and rechargeable for the past few years now. The company used terms like bend, roll, twist, scrunch, fold, flex to describe the battery. EJ Shin, head of strategic planning at Jenax says: What we’re doing at Jenax is putting batteries into

J.FLEX, A LITHIUM-ION BATTERY THAT IS FLEXIBLE Read More »

BOONTON 40GHZ USB CONNECTED RF POWER SENSORS

BOONTON 40GHZ USB-CONNECTED RF POWER SENSORS

RTP5000 Real-Time Peak Power Sensors provide high video bandwidth, fast rise-times, and unique Real-Time Power ProcessingTM to deliver 100,000 RF measurements per second, with no gaps in signal acquisition, and zero measurement latency. Saelig Company, Inc. has introduced the Boonton RTP5000 Series Real-Time Peak Power Sensors, offering industry-leading performance with wide video bandwidth, fast rise times,

BOONTON 40GHZ USB-CONNECTED RF POWER SENSORS Read More »

CRAFTALIGHT – BRIGHTEN UP YOUR HANDBAGS

CRAFTALIGHT – BRIGHTEN UP YOUR (HAND)BAGS

Interesting how what started as a little discussion turned out to be one great solution at MAKE 100 as founders and owners of Staudt Technologies, Katharina and Yannic share their newly discovered solution with the world. Having realized how really difficult it is to quickly find stuff in equipped handbags, backpacks, purses, etc., the couple decided to hack a solution

CRAFTALIGHT – BRIGHTEN UP YOUR (HAND)BAGS Read More »

0 TO 5V OUTPUT ANALOG HALL SENSOR FOR FOOT CONTROLLER

0 TO 5V OUTPUT ANALOG HALL SENSOR FOR FOOT CONTROLLER

This project includes an analog Hall Effect sensor and an Op-Amp circuit which can be used as position or angular sensing with the benefits of no contact and wearing, high stability and wide sensing range. Two configurations of the magnet and Hall sensors are analyzed. Trimmer Potentiometer PR2 provided to adjust the offset and PR1 helps to set the

0 TO 5V OUTPUT ANALOG HALL SENSOR FOR FOOT CONTROLLER Read More »

IPS 354 RADAR SENSOR – INNOSENT’S MID RANGE MOTION DETECTOR

IPS-354 RADAR SENSOR – INNOSENT’S MID-RANGE MOTION DETECTOR

InnoSenT’s IPS-354 operates in the 24 GHz ISM band and was developed for classic industrial radar applications, especially as a motion sensor for escalators. It is a K-band transceiver with two antennas; the split of the transmitting and receiving path enables maximum gain. For signal intensification, it also comes with an IF pre-amplifier. Its bandwidth is limited

IPS-354 RADAR SENSOR – INNOSENT’S MID-RANGE MOTION DETECTOR Read More »

TEMPER SLEEK TEMPERATURE SENSOR BUILT ON ESP8266

TEMPER: SLEEK TEMPERATURE SENSOR BUILT ON ESP8266

Meet Temper, a compact, low power temperature sensor based on ESP8266 and SHT30 with a large 13×7 pixel led display. It accesses WiFi periodically to display temperature and humidity data as well as battery percentage via the MQTT protocol. The device’s display uses three 74HC595 + 7 n-fets,  TP4054 to handle battery charging through a USB and MCP1700T LDO to power the ESP. For WiFi setup, Temper

TEMPER: SLEEK TEMPERATURE SENSOR BUILT ON ESP8266 Read More »

Scroll to Top