I. Introduction The goal of this project is to build a digital compass that displays both the direction and cardinal points on a television. Other functionalities were added to complement the sensor interface, such as, temperature display, magnetic declination input and disability option. At the highest level, this project involves acquiring two output readings from […]
Digital Compass Using Mega 32 Read More »
Introduction We created a project in which a user could control the movement of an Etch A Sketch using a typical serial mouse. The public was introduced to the EAS in 1960 and since then it has stayed virtually the same. This nostalgic toy is recognized by many generations and we decided to put a
Electr-O-Sketch Using Atmega 32 Read More »
Introduction Perusing through the impressive list of past projects, we decided to make our final project a combination of two technologies—wireless technology and the MP3 player. Specifically, we decided to create an MP3 player that broadcasted the songs to an FM dial. We call this the “MP3 Radio.” To accomplish this, we used an ATMEL
The Ultimate MP3 Radio Using ATMega32 Read More »
For our design project, we decided to replicate the video game known as Scorched Earth: The Mother of All Games where two tanks fire missiles at one another by adjusting angles and power while adjusting for variable wind. The objective of Scorched Earth is to destroy the enemy tank before your tank is destroyed. Two
Scorched Earth video game using Atmel Mega32 Read More »
If this is your first time on the Cornell Campus, you need not worry! Cause we have the best guide for you! Introduction The Cornell Campus is quite large, and finding your way around can get a bit frustrating. The Big Red Guide is a GPS receiver that displays your position on an LCD, as
The Big Red Guide Using Atmel AVR Mega32 Read More »
Introduction For my ECE 476 Design Project, I built Missile Command using the Atmel Mega 32 microcontroller. My version of Missile Command is based on Ataris 1981 version. After looking at some of the past ece476 final projects, I noticed no one had tried to build Missile Command. This game was one of my favorites
MISSILE COMMAND USING ATMEL MEGA 32 Read More »
Introduction “Our 3D gForce Mouse will enable use to move the curser in the air freely with the capacity of scrolling” The rationale for this design is two fold. We wanted to do this design because we wanted to make a zero-impact pointing device for those with injury. We also wanted to implement this injury
3D gForce Mouse Using Mega32 Read More »
Introduction We have created a real-time, multithreaded, preemptive operating system called kaOS for the Atmel Mega32 microcontroller, which loads and executes programs from a Secure Digital or MMC card. We wrote this OS and created the SD/MMC card reader as a final project for Cornell’s ECE 476 class taught by Professor Bruce Land. Our reason
kaOS operating system and loader using atmega32 Read More »
Introduction Our project was a real-time weather update system that accepted an airport code from the user via a keyboard, looked up the code on an internet database, and displayed the resulting weather information on a television screen. We used the PS/2 protocol, between a standard keyboard and an Atmel Mega32 chip, to decode the
WeatherDog Using ATMega32 Read More »
Introduction This project implements a wireless surface electromyograph that displays the signal using a television as an oscilloscope. Electromyography detects the electrical signals that the human body generates to contract muscles. Detecting very low voltages in the milliVolt range on the skin surface is not a trivial task. As shown in figure 1, EMG signals
Wireless Electromyograph using ATmega32 Read More »
