About: Ibrar Ayyub

AVR ATmega32 Mini Development Board is interfaced with a LCD module (2×16) operating at 5V. The voltage at the third pin of the LCD can be varied by potentiometer to adjust contrast. LCD can work either in 4 or 8 bit mode. Here, the circuit is designed to work in 8-bit mode. Control lines RS & […]

Based on Nordic Semiconductor’s nRF52832 Bluetooth low energy System-on-Chip (SoC), this development kit incorporates nine different sensors plus a microphone and speaker, and enables app developers to configure, test, and demonstrate Bluetooth low energy IoT devices linked to mobile apps and Cloud platforms without needing RF firmware coding skills or development tools The Nordic Thingy:52 […]

Taking a look at what other people do in a certain aspect can give you an insight and an indicator in your own journey. Maybe IoT is one of the cutting edge technologies with rapid changes year after year, if not month after month. About 700 developers answered Eclipse foundation IoT developer survey. The survey […]

Obstacle detecting sensors are one of the most basic type of sensors that electronic hobbyists use. There are several methods to make cheap obstacle sensors. These simple sensors are made using a IR Rx/Tx pair or Normal LED and LDR pair(this design is most basic and is heavily affected by environment lighting conditions). These sensor […]

Wooden Digital Clock with – Time, Temperature, Humidity, Alarm – WiFi controller through web browser – Advance display config – Stop alarm by vibration sensor size : 64 x 64 x 79 mm i use PLA with wood veneer instead of full wood my room’s too small for put woodworking tools If want view detail […]

Using PWM (Pulse Width Modulation) to control a device is a common practice in embedded systems; for example, you can use it to control the light intensity of a LED or control the speed of a DC motor. In this article, we will explain how to get a PWM from the AVR Atmega32 and we shalll […]

Kodama Inc is a new company that delivers a new generation of FDM 3D printers that increase the possibility of affordable 3D printing. Recently, Kodama launched its new 3D printer “Obsidian“, the first 3D printer made for professional applications starting at under $100. Most additive manufacturing machines in this price range are not aesthetically designed, nor engineered for […]

Strong electron interactions can drive metallic systems toward a variety of well-known symmetry-broken phases, but the instabilities of correlated metals with strong spin-orbit coupling have only recently begun to be explored. A team of physicists at the Institute for Quantum Information and Matter at Caltech, had discovered an new state of matter that may have applications […]

Servo motors are a type of electromechanical actuators that do not rotate continuously like DC/AC or stepper motors, rather they used to position and hold some object. They are used where continuous rotation is not required so they are not used to drive wheels (unless a servo is modified). In contrast they are used where […]

Earlier this month, the multifunctional autonomous mobile robots “AMY A1” and “AMY M1” had been launched as the first batch of products of AMY Robotics. Amy Robotics is an innovative technology company focusing on research and development of service robots that enhance quality of life with robotic technologies, products and services. Both AMY Robots are intelligent mobile-service robots characterized […]