Interfacing(USB – RS232 – I2c -ISP) Projects

Arduino Uno powering Adafruit Trellis LED keypad

Adafruit Trellis Shield Latching Keyboard Test using ATmega328P with Proteus Simulation

Introduction This project demonstrates an Adafruit Trellis Shield latching keyboard test using the ATmega328P controller in a Proteus simulation environment. It is a simple but useful microcontroller project for learning how a keypad-style LED button matrix works with an Arduino-compatible AVR controller. The system reads button presses from the Trellis keypad and toggles the matching […]

Adafruit Trellis Shield Latching Keyboard Test using ATmega328P with Proteus Simulation Read More »

ATmega16 8255A LED control breadboard circuit

I/O Expander with 8255A using ATmega16 with Proteus Simulation

Introduction Expanding I/O pins is a common requirement in many microcontroller projects, especially when working with limited-pin devices like the ATmega16. This project demonstrates how to use the 8255A Programmable Peripheral Interface to control multiple LEDs using fewer pins. Using Proteus simulation, this design shows a practical approach to extending digital I/O capabilities in embedded

I/O Expander with 8255A using ATmega16 with Proteus Simulation Read More »

ATmega16 breadboard ADC LED display

AVR ADC using ATmega16 with TLC549 Serial ADC in Proteus Simulation

Introduction AVR ADC using TLC549 demonstrates how analog signals from sensors can be converted and processed by a microcontroller. Analog signals from sensors cannot be processed directly by most microcontrollers because they operate using digital logic. To bridge this gap, Analog-to-Digital Converters (ADC) are used in many microcontroller projects and embedded systems. This project demonstrates

AVR ADC using ATmega16 with TLC549 Serial ADC in Proteus Simulation Read More »

Atmel AVR Programmer USB Circuit Atmega8 1

Atmel AVR Programmer USB Circuit Atmega8

Via the USB port of your computer that you can program Atmel series microcontrollers ISP port with stylish design a programming circuit. Prepared with eagle pcb circuit usb programming. are schematic drawings. To use the circuit to inspectors ATmega8 avr-doper-mega8-12mhz_a.hex need to download the file. Simplified Version of AVR Doper USB Programmer simple inexpensive Parallel ISP programmer

Atmel AVR Programmer USB Circuit Atmega8 Read More »

Pololu USB AVR Programmer Users Guide 1

Pololu USB AVR Programmer User’s Guide

Overview The Pololu USB AVR programmer [http://www.pololu.com/product/1300] is a programmer for Atmel’s AVRmicrocontrollers and controller boards based on these MCUs, such as Pololu Orangutan robot controllers[http://www.pololu.com/category/8/robot-controllers] and the 3pi robot [http://www.pololu.com/product/975]. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help with building

Pololu USB AVR Programmer User’s Guide Read More »

ATMEL USB PROGRAMMER CIRCUIT ZIF SOCKET USBASP ATMEGA8

ATMEL USB PROGRAMMER CIRCUIT ZIF SOCKET USBASP ATMEGA8

Atmel USB programmer shared by more ö “Atmel AVR USB programmer” circuit designed by the advanced ZIF socket version. Source: usbasp – USB programmer for Atmel AVR controllers http://www.fischl.de/usbasp/ As long as the 8-pin pinout fit, 20-pin, 28-pin, 40-pin… Electronics Projects, Atmel USB Programmer Circuit ZIF Socket Usbasp ATmega8 “atmega8 projects, microcontroller projects, programmer circuit. Atmel USB

ATMEL USB PROGRAMMER CIRCUIT ZIF SOCKET USBASP ATMEGA8 Read More »

How to Flash MicroPython Firmware on a ESP8266 Based Sonoff Smart Switch

How to Flash MicroPython Firmware on a ESP8266 Based Sonoff Smart Switch

What’s Sonoff? Sonoff is a device line for Smart Home developed by ITEAD. One of the most flexible and inexpensive devices from that line are Sonoff Basic and Sonoff Dual. These are Wi-Fi enabled switches based on a great chip, ESP8266. While the Sonoff infrastructure may work quite well for basic users, others may want to hack into that hardware

How to Flash MicroPython Firmware on a ESP8266 Based Sonoff Smart Switch Read More »

How to Count From 0 to 99 Using 8051 Microcontroller With 7 Segment Display

How to Count From 0 to 99 Using 8051 Microcontroller With 7 Segment Display

Hello everyone, In this tutorial we are going to tell you about how to count from 0 to 99 using two 7 segment display. Step 1: Software Used: As we are showing proteus simulation so FOR CODING AND SIMULATION YOU REQUIRED: 1 Keil uvision: Their are lots of product from keil. so you will be required

How to Count From 0 to 99 Using 8051 Microcontroller With 7 Segment Display Read More »

USB TO LPT CONVERTER CIRCUIT

USB TO LPT CONVERTER CIRCUIT WITH ATMEL ATMEGA8

Converter from USB to LPT parallel port (25 pin SubD receptacle) with hardware virtualization at input/output instruction level Supports all parallel port modes named SPP, EPP and ECP, 16 Byte FIFO depth USB Low… Electronics Projects, USB to LPT Converter Circuit with Atmel ATMEGA8 “atmega8 projects, avr project, microcontroller projects, “ Converter from USB to LPT parallel port (25 pin SubD

USB TO LPT CONVERTER CIRCUIT WITH ATMEL ATMEGA8 Read More »

Scroll to Top