Nearly all of our wireless communication is done using radio waves*, including phone calls, text messages, and WiFi. With its built-in radio transmitters and receivers, the Micro:Bit microcontroller makes it super easy to build all sorts of projects with radio communication. This particular project is a simple & quick way to send text messages between […]
Tides. In Anchorage Alaska we live on a point located between two enormous tidal bays–so big in fact that Captain Cook on his initial survey of the area thought (hopeful thinking) that this entrance would prove to be a “northwest passage”. It is shallow and all boats traversing to the port are aware of the
This tutorial will show you how to turn on an LED using both the built-in LED on a development board as well as using a GPIO pin. I happen to be using a DE0 CV Dev board from Terasic. We will be using the Quartus design environment to do this. Software Requirements – Quartus design
Work is of two kinds: first, altering the position of matter at or near the earth’s surface relatively to other such matter; second, telling other people to do so. The first kind is unpleasant and ill paid; the second is pleasant and highly paid. Bertrand Russell The joy of measuring work or in this case
This project uses green surface-mount LED’s along with an AVR ATTiny45 microcontroller to simulate the behavior of fireflies in a jar. (note: the firefly behavior in this video has been greatly sped up in order to be easier to represent in a short film. The default behavior has significantly more variance in its brightness and
What’s Sonoff? Sonoff is a device line for Smart Home developed by ITEAD. One of the most flexible and inexpensive devices from that line are Sonoff Basic and Sonoff Dual. These are Wi-Fi enabled switches based on a great chip, ESP8266. While the Sonoff infrastructure may work quite well for basic users, others may want to hack into that hardware
How to Flash MicroPython Firmware on a ESP8266 Based Sonoff Smart Switch Read More »
Lets describe a clock… “Clock is a device that counts and shows time(relative)”!!! Guess I said it right so lets make a CLOCK with ALARM feature. NOTE: it will take 2-3 minutes in reading please read the whole project or else I will not be responsible for any part damage. Step 1: COMPONENTS REQUIRED 6 components needed : 1. Microcontroller (I have used
Digital Clock Using Microcontroller (AT89S52 Without RTC Circuit) Read More »
Sonoff is a device line for Smart Home developed by ITEAD. One of the most flexible and inexpensive devices from that line are Sonoff Basic. It is a Wi-Fi enabled switch based on a great chip, ESP8266. This article describes how to set up the Cloud4RPi service on a Sonoff Basic smart switch. In the previous instructable, we explained how to flash the
How to Control ESP8266 Based Sonoff Basic Smart Switch With a Smartphone Read More »
This is a very basic project of 8051. In this project we are going to tell you about how we can interface 16*2 lcd to 8051 microcontroller. So here we are using full 8 bit mode. In the next tutorial we will tell about 4 bit mode as well. Step 1: Software Used: As we
Interfacing 8051 Microcntroller With 16*2 Lcd in Proteus Simulation Read More »
In this tutorial we are going to tell you about how we can interface lcd with 8051 in 4-bit mode. Step 1: Software Used: As we are showing proteus simulation so FOR CODING AND SIMULATION YOU REQUIRED: 1 Keil uvision: Their are lots of product from keil. so you will be required c51 compiler. You can
Interfacing 8051 Microcontroller With Lcd in 4-bit Mode Read More »
