A DIY ATTiny44 based guitar preamp+effector. All the audio processing is done digitally on-board. So it is definitely not a HiFi system, but something you can definitely have fun programming. You can program the audio properties in Arduino IDE and create mobile apps that talk to the module for remotely controlling the effects. This instructable […]
ATTiny44 Guitar Effector Read More »
Note: updated with new firmware, a schematic and a tips for a programmer. A couple of years I embarked on my own home automation project. It started off by building a server controlled 433 MHz transmitter build with an Arduino to switch lots of cheap PT2262 based remote switches. Later I added an Arduino based
MQTT and Wifi Powered Mailbox Flag Read More »
Some time ago, I tried to make an “Instructables Hit Counter” using the Instructables API, and an Arduino Uno with a wired network shield. However, with the limited RAM of the Arduino Uno, I was unable to get the system to work. A while ago, I noticed a similar project done by diytronics using a NodeMCU. This was just
Instructables Hit Counter (ESP8266-01) Read More »
In this wireless gesture controlled robot project I am going to control a robot using hand gestures. This is an easy, user-friendly way to interact with robotic systems and robots. An accelerometer is used to detect the tilting position of your hand, and a microcontroller gets different analogue values and generates command signals to control the robot.
Wireless Gesture Controlled Robot Using Micro-controller ATmega328 Read More »
VivoGame (something like “liveGame” in english) is a funny 2 players game whose goal is hit a target with a automated dart. One player wear a “glasses” that doesn’t let him see the target. 3 leds that replace each lens, allow the other one, who see the target, moving the first player’s head with a
Hi There Everyone, This is Tahir Ul Haq and introduces you to another member in the family. This time the project is named as Weather Monitoring System. This is another TIVA based project presented by students of UET LHR. Weather monitoring plays an important role in human life, so the collection of information about weather
Weather Monitoring System Using TIVA Read More »
https://youtu.be/7I8b6yBJvXE Step 1: COMPONENTS REQUIRED Bluetooth module (HC-05) AT89S52/C51/S51/C52 microcontroller Relay Driver ULN2003A Relay Resistances and capacitors as circuit diagram depicts(below) power module(if the input is more than 5V or else not necessary) IC 7805(5V voltage regulator) 1000uF capacitor 10uF capacitor led and resistance(as per convenience so that led doesn’t get damaged) IMPORTANT NOTE: USE
DIY Cheapest Bluetooth Controlled Home Automation Read More »
a simple 3 buttons on-off with pic12f629. it’s written with MikroC Step 1: The Code… start the code with ”int”———————————————————- int x0,x1,y0,y1,z0,z1; ////// with this the GPIO outputs could stay on or off void main() { GPIO = 0x00; ////// all outputs are 0 CMCON = 0x07; ////// Disable CMCON PORT TRISIO = 0b00111000; //////
Simple 3 Button On-off With 12f629 (mikroC) Read More »
Particle Photon is a tiny micro controller, just about the size of an arduino nano. But the photon is designed for easy IoT prototyping, it supports OTA updates to its firmware. So all we have to do is get it connected to the internet and we could do all the programming wireless, the photon uses a
OLED Display (SPI) With Particle Photon Read More »
In this instructable, I am going to give step wise procedure of programming a P89V51RD2 microcontroller on breadboard. If you are directly seeing this tutorial, then please see my previous tutorial on basic breadboard power stage here : https://www.instructables.com/id/Breadboard-5V-Pow… In this tutorial we are going to mount the microcontroller on the breadboard and attach a single
Programming P89V51RD2 (8051 Microcontroller) on Breadboard Read More »
