here’s how to convert otherwise reasonable quality video into pixelated garbage and play it on a 2 color 8×8 led matrix, with no sound and only moderate sync. ingredients: – (1) 8×8 2 color led matrix – (1) atmel avr atmega168 – (2) 74hc595 shift register – (1) 3.3V regulator – (1) a linux system […]
Watch futurama on an 8×8 pixel screen using atmega168 microcontroller Read More »
RFID is the craze, found everywhere – from inventory systems to badge ID systems. If you’ve ever been to a department store and walked through those metal-detector-looking things at the entrace/exit points, then you’ve seen RFID. There are several places to find good information on setting up RFID, and this instructable focuses on installing the
AVR/Arduino RFID Reader with UART Code in C Read More »
In my life i deal with lots of sensitive electronics every day and frying these electronics is a big concern when touching them. Most people think its hard to fry electronics with static electricity. Its not, one touch could send your $100 graphics card down the drain if you aren’t properly grounded. Do you really
How To Make A Grounding Wrist Band Read More »
This instructable will show you how to easily modify a readily available plastic case to hold and protect your AVR Dragon PCB. Atmel promotes their AVR Dragon as a low cost development product tool for use with their AVR microcrontollers. While the product does come in a fancy red cardboard box, unlike all the other
A protective case for the Atmel AVR Dragon using AVR Read More »
Last year I modified a blue LED fan with RGB LED’s to enhance the look of my server case. Last summer I built a gaming computer and ever since I wanted to light it up with multiple controlled lights and fans. I finally figured out an easy interface and designed a simple network (the “fan
FanBus Digital Fan and LED Interface for PC using ATMega168 microcontroller Read More »
Microcontrollers (MCUs) are fantastic little ICs that give an extra element of versatility to your electronics, robotics or other project. But they’re really not much use on their own. To function, all MCUs need some sort of support components, and a board to live on — one example of course being the famous Arduino. These
Augmenting a Microcontroller using AVR Read More »
Some of the fruit and vegetables we eat can be used to make electricity. The electrolytes in many fruit and vegetables, together with electrodes made of various metals can be used to make primary cells. One of the most easily available vegetable, the ubiquitous lemon can be used to make a fruit cell together with
Tiny AVR Microcontroller Runs on a Fruit Battery Read More »
With a single LED you can indicate the state of something: on or off. That might be a little boring. With an array of LEDs you can display characters or even some simple blocky graphics. That might add a little pizzaz to a small microcontroller project. You could use individual LEDs wired into a grid
How to use an LED Array Module using AVR Read More »
The Digg Button from adafruit industries www.adafruit.com is a very simple DIY electronics kit suitable for beginners. It consists of a microprocessor, a 3-digit display, a button and some available i/o pins. As it comes from adafruit, it’s a counter that displays the number of times it’s button has been pressed. The open i/o lines
Hacking your Digg Button with a Removable Interface Cable using AVR Read More »
What do you do with an old phone, a microcontroller and lots of time? You hook the old phone’s LCD screen to the computer USB of course! In this project we’re going to communicate with a Nokia 3310 LCD display over USB! How are we going to do that? We’re going to connect the LCD
Connecting Nokia 3310 LCD to USB using AVR Read More »
