SmartSpin2K is an open hardware and software DIY module that converts BLE signals from a cycling APP (like Zwift, FulGaz, RGT, Sufferfest, etc.) and uses the information they broadcast to increase and decrease resistance on a spin bike by rotating the resistance knob with a stepper motor. SmartSpin2k receives BLE signals from common cycling peripherals such […]
Spin Bike Controller Read More »
IntroductionAs you probably know, Iran has dry weather, and there is a lack of water in my country. Sometimes, especially in the summer, it can be seen that the government cuts the water. So most of the apartments have a water tank. There is a 1500 litre tank in our apartment which provides water. Also,
UltraSonic Liquid Level Controller Read More »
What a “0–5 V” module really outputs A pedal sensor sold as 0–5 V output is usually a ratiometric linear Hall IC, sometimes with an op-amp. The Honeywell SS495A runs from 4.5 V to 10.5 V, idles at 2.50 V ±0.075 V, gives 3.125 mV/G ±0.125 mV/G over a ±600 G minimum linear range, and
0 TO 5V OUTPUT ANALOG HALL SENSOR FOR FOOT CONTROLLER Read More »
A MIDI synt controller box is a box that’s main purpose is to play sounds on another device like a computer or synth module. The box itself doesn’t generate any noise on its own at all, if they do it’s very limited. MIDI controllers range from little tiny things that are pretty cheap to make
VOICE BOX: MIDI SYNT CONTROLLER Read More »
PID Temperature Controller Max232 PC via RS232 serial port connection can be made According to information I found PID Temperature Controller is accurate temperature control system i AT90S2313 control system with high mains voltage… Electronics Projects, AT90S2313 Computer Supported PID Temperature Controller “avr project, microcontroller projects, “ PID Temperature Controller Max232 PC via RS232 serial port connection can
ATMEGA32 10A 2-CHANNEL METER WITH LCD DISPLAY Read More »
The major aim of this no break power supply project is to supply continuous energy supply to a load, by picking the supply from any spring out of the four like – generator, mains, inverter and solar robotically in the lack of any of the spring. The demand for power is raising day by day
Auto No Break Power Supply Control Read More »
In playing around with DIY electronics, Pugs has developed enough confidence to share his knowledge with his juniors. So, in one such occasion, he decided to give a try to program a micro-controller, as part of the electronics hobby club. There have been many hobbyist micro-controllers, like 8051, PIC, AVR, … and an equivalent or
Micro-controller Programming on a Bread Board Read More »
In ths project you can learn how to build a servo controleer motor with the ATMEGA328 board. The position of the servo motor is controlled by the software (sweep back and forth) or by a potentiometer. The position of the servo motor is set by the length of a pulse. The servo expects to receive
servo motor controller Read More »
This project is an update to the previous dehumidifier based you can here: http://davidegironi.blogspot.it/2013/04/avr-atmega-dehumidifier-controller.html This update adds some usefull functions. The main issue that i’ve fixed is the microcontroller crash, that happens sometimes. I’ve noticed that sometimes the controller stop running, crash or doesn’t works as expected. After some experimets, i’ve noticed that probem was due
AVR Atmega dehumidifier controller board, update Read More »
Introduction For our Final Project in ECE 4760, we built a controller that interfaces with a computer running a PowerPoint display through USB. The device can control slide transitions based on hand motions or button presses as well as play MP3 files when it detects people near the display. We chose to do this project
Motion Sensing PowerPoint Controller Using Atmega644 Read More »
