The main aim of this project is to come up with a functional WiFi switch that will help us operate via the “Blynk” app from the Mobile app store. This Instructable is successfully tested with very basic knowledge of Electronics and I would appreciate suggestions from professionals in the domain to comment for appropriate changes. […]
WiFi LED Switch IoT Read More »
PCBs , or Printed Circuit Boards have become an integral part o the modern world. Used in just about every major piece of technology in the world from the simple to the complex, it’s something of a commonplace today. Ever since the PCBs first emerged, a couple of decades ago, they have been adopted and developed
Hello Builders! The title of this ‘ible is quite simple and so is this project made with the LinkIt One Board. It will detect the amount of light in your surrounding and if its low and motion is detected then turn on the led. This nightlight plugs directly into the wall with the help of
LinkIt One Motion NightLight Read More »
All options are come with smart phones. Smart phones make our work very easy and make us lazy. Turn on and off home appliances using smart phone with blue tooth is in market, but cost high. So DIY Blue tooth Home Automation using Free Android App and Low cost Link it one. Details Given here
Linkit One-Home Automation With Bluetooth Controller Android App Read More »
Are you worried of your kids getting lost when you are out at a crowded place? That’s obvious, isn’t it? This project will reduce the risk of children getting lost at unknown and crowded places thus will also eleminate your nightmares. As you may have already guessed from the name, this project is basically a
Wearable Child Tracker Read More »
Create your own rc controlled led-strip for individual room illumination! Most rgb-led-strips are controlled by an infrared remote control. To turn it off or on or change the color, you have to stay in front of the receiver. This is boring and not really smart. To control the light in a cooler way, i developed
RC Controlled Rgb Led Strip Read More »
This instructable will guide you to glow an LED using a touch sensor which means that the LED will glow when you touch on the probe of the sensor. The project uses the Mediatek linkit one connected to a touch sensor and an LED. As soon a touch is detected, the output goes high which
Linkit ONE Touch LED Read More »
In this instructables I’m going to show you how to create a touch switch using the Linkit One board. This is a capacitive touch and not a resistive touch, so you could use it for security purposes or design it just to turn on the lights when you touch a touch pad. In this project
Touch Switch Using the Linkit One Read More »
This project is an electronic dice using an Attiny84 chip. The Attiny84 works like an Arduino except it is a 14 pin chip and is has less memory and there is no built in programmer. I will be showing how to upload a program with an Arduino using the Arduino IDE and a USBtinyISP in
Electronic Dice Using Attiny84 Read More »
In this instructable I’m going to show you how to design a kitchen timer using the Linkit One, the timer has a maximum duration of 30 minutes. And once the timer is done counting down it fires a buzzer to notify you. The time interval can be set in steps of 5 minutes and each
Linkit One Kitchen Timer Read More »
