In this tutorial we are going to interface a rotary encoder with ATmega8 microcontroller. ATmega8 is atmel’s microcontroller series designed for embedded applications. Rotary encoder is used to know the position of movement and angular movement of a motor or axis. It’s a three terminal device usually, with power and ground pin counts to five. A rotary encoder […]
Rotary Encoder Interfacing with ATmega8 Microcontroller Read More »
GPS modules are widely used in electronics applications to track the location based on longitude and latitude coordinates. Vehicle tracking system, GPS Clock, Accident Detection Alert System, traffic navigation, surveillance system etc. are few of the examples where GPS functionality is essential. GPS provides Altitude, Latitude, Longitude, UTC time and many other information about the particular location, which are taken from
GPS module (uBlox Neo 6M) Interfacing with AVR Microcontroller Atmega16/32 Read More »
This is a device that indicates by buzzing whenever the door crosses the specified distance giving a red light indication.This has been developed by linkit one board received in the giveaway! Its total cost is ~63$ including ~60$ linkit one board.Here’s video of it in action :- https://youtu.be/SbazZ44E9QY Step 1: Things Required We need:- Linkit
Door Open Alarm With Linkit One Read More »
I know WIZ550S2E solution for monitoring. Recently WIZwiki-W7500ECO platform was announced by WIZnet. So I implemented a firmware of WIZwiki-W7500ECO by WIZ550S2E SW modification because I can handle a source code easily. You can know the status of equipment even if it is so far. Please refer to the following step. Step 1: Prepare Materials
IoT Device for Serial to Ethernet by Using TCP Read More »
This Instructable was designed to answer the question: how do I get started in microcontrollers? Now, in clear, simple English, you can learn what a microcontroller is, and how to use one. You will learn how to make everything that you need to get started. This does require a Windows PC with at least one
Learn About Microcontrollers Read More »
DIY-Bluetooth based Home Automation Project In this project, let’s see how to design a Bluetooth based home automation project.This article explains the steps involved in the designing of a Bluetooth home automation kit, starting from the configuration of a Bluetooth module. The article also explains how to select an App, read the keywords sent by
Bluetooth Home Automation using AVR and Android App Read More »
description (hardware) Above and below you can see the terminal. The LCD display is represented by the connector X1. It has a HD44780 compatible LCD controller and I’m using the 4-bit interface to send data to the LCD controller. The LED’s are multiplexed. I’ve seen the circuit somewhere in the web. It is possible to
AVR terminal for serial port using TSOP1738 microcontroller Read More »
