About: Bilal

Obstacle Avoidance Vehicle capable of detecting objects, scanning the area and navigating through the less obstructed path. Step 1: Materials Needed Hardware Arduino UNO based on ATmega328 microcontroller DYP-ME007 ultrasonic sensor Servomotor L298N Dual H-Bridge Motor driver Power Supply – i used LiPo 2s 4000 mAH 2x DC motors with 298:1 metal gearbox LED Chasis […]

Greetings to HackerBox Hackers around the world! HackerBox 0044 brings us PCB Design, AVR Device Programming, Serial RGB LED Applications, Pro ESP32 WiFi OLED Development, and much more. This Instructable contains information for getting started with HackerBox 0044, which can be purchased here while supplies last. If you would like to receive a HackerBox like this right […]

The ATtiny13 series chips are extremely cheap and useful chips for small projects that don’t need a full Arduino, but due to very outdated tutorials and a lack of information, it took me the better part of a day to figure out how to program these with the Arduino IDE. To fix this lack of […]

After this Instructable you should be able to program an A Ttiny85/45 with an arduino. It may sound complex but it really isn’t. After doing some research I could not find to much info on how this could be done. I however did find https://www.instructables.com/id/Program-an-ATtiny-with-Arduino/. This Instructable is my interpretation of what I learned from Randy.  Step […]

This example code and simple wiring demonstrated how to setup an AVR ATtiny85 processor to react to external interrupts. Whenever the voltage changes on the chosen input pin (pin 6 / PB1), it executes the interrupt service routine (ISR), checks the current voltage, and sets the output pin (pin 3 / PB4) to match. This […]

A while back, I posted up a quick and dirty “el cheapo” method of getting started programming the Atmel AVR series chips: Ghetto Programmer (version 1.0) Since then, I’ve vamped, re-vamped, and otherwise improved my setup. Thought it’d be nice to document it. The goal was to get a flexible, compact, portable, use-anywhere, AVR-based microcontroller prototyping […]

Stefan Wagner’s EasyEDA profile is definitely the go-to source for all things ATtiny. He’s built 10s of projects, some of which we have covered here, that are based on the tiny microcontrollers, and it only makes sense that one of his latest projects, called the TinyHVSP, is a tool to help with development using the Attiny […]

Well most of time i get troubled when i need Arduino in some projects where i need few I/O pinsWell thanks to Arduino-Tiny platform Arduino program can be burned into the Avr-tiny Series like Attiny 85/45 Arduino-Tiny is an open source set of ATtiny “cores” for the Arduino platform. It provides a core that enables […]

This is a tutorial for programming the ATtiny chip. This tutorial will be more in depth than most. I will give you every step and tell you the things nobody told me when I first started programming ATtiny. Things You’ll Need – Arduino Uno( Can be done with other boards but I will be using […]

I love LED chasers. A bunch of LEDs neatly turning on and off on a precise timing – lights running one way, then the other way… It’s relaxing, soothing, and hypnotic. There are so many LED chaser/scanner/sequencer circuits out there, some are made with discreet transistors, some based on logic ICs, and more and more […]