The ATtiny84 is a truly amazing chip, not quite an Arduino, but in some ways much more powerful. This is a small project designed to show off it’s potential. All Atmel microcontrollers have their pins mapped in banks of eight, whether all eight pins are present or not. For instance the ATtiny85 is an eight […]
ATtiny84 Binary Counter, Up and Down Read More »
My wife and I recently went on a winter getaway and left our two small children behind (praise the lord). In the past when we have gone on trips we have discussed where we are going and pointed it out on a map and sometimes we have drawn where we would be flying into, driving,
Where in the World Are Mom & Dad? Read More »
In this instructable we’re going to build and program an awesome fortune cookie teller, using the Particle Photon connected to thethings.iO via mqtt and to Twitter via api requests. Desired functionality: – Each time the button (connected to the Photon) is pressed, this will publish a message to thethings.iO via mqtt – From thethings.iO, a trigger is
Fortune Cookie Teller With Particle Photon, Thethings.iO & Twitter Read More »
In this instructible, I will guide you through the use of the WF32 as an HTTP server that hosts a website that can be used to control servos and a stepper motor. The purpose of this was to create an iPad mount that allowed users to log in from a remote location and point the
Remote IPad Mount Control Using WF32 Read More »
Today I am going to show you how to make a pulse counter quickly with littlebits modules. This is a very fun and easy project to do and you can, for example, count the times a door opens, as was the case with our makerspace that we made a counter of these to count the
How To Make A Pulse Counter With Littlebits Read More »
In this instructable I want to show you how to control a servo using a microcontroller (18F2550) and how to avoid using an unknown library to control a servo. Step 1: Materials Power supply Breadboard Wires or jumpers Resistors Transistor or optocoupler Microchip microcontroller PICC Compiler(It could be another one, but I’m going to use
Servo Control With Microchip Microcontroller Read More »
A MIDI synt controller box is a box that’s main purpose is to play sounds on another device like a computer or synth module. The box itself doesn’t generate any noise on its own at all, if they do it’s very limited. MIDI controllers range from little tiny things that are pretty cheap to make
VOICE BOX: MIDI SYNT CONTROLLER Read More »
I know STMicroelectronics Nucleo platform for IoT. Recently W5500 Ethernet shield will be announced by WIZnet. So I implemented a firmware of Nucleo board by Ethernet SW modification because I can handle a source code easily. You can know the status of equipment even if it is so far. Please refer to the following step.
How to Use the Blynk App on IoT Board(Nucleo) Read More »
There is no way that i have found to interact with a computer via Amazon echo. I wanted the ability to pause Netflix and Hulu using an echo. That is the pretext to this project. I also wanted to use parts i already had and make it as easily as possible. Here are the steps
Pause Netflix/ Hulu With Alexa Read More »
We will be changing how we use the Stone LCD with the STM32 series cards that we used to use with the Arduino. However, we will be using the STM32CubeMx and I have tried to provide the editor with detailed space in writing for use with the Arduino, so I will not be detailing this
Stone LCD is used together with STM32 Read More »
