LCD Projects

Block Diagram 3

Graphical LCD Oscilloscope using ATmega16Microcontroller

Introduction The popularity of microcontrollers is on the rise, thanks to their compact size and impressive capabilities. Embedded systems are being constructed around microcontrollers and peripheral devices [3]. An oscilloscope is frequently employed to observe the waveform of an electrical analog signal, typically representing voltage, time, and frequency. Parameters such as peak-to-peak voltage, frequency of […]

Graphical LCD Oscilloscope using ATmega16Microcontroller Read More »

Photo of the assembly of project

AUTOMATIC EGG INCUBATOR

The global demand for egg incubators stems from various compelling reasons. Individuals passionate about ornamental birds often struggle to acquire broody birds for rearing, leading them to seek artificial means for egg hatching. Meanwhile, non-vegetarians faced with limited options may opt for artificially raised birds due to constraints in sourcing naturally brooded birds. Additionally, even

AUTOMATIC EGG INCUBATOR Read More »

LM35 Temperature Sensor with ATmega32 and LCD

DIY Temperature Measurement Setup with LM35 Sensor, ATmega32 Microcontroller, and LCD

In this instructional guide, you’ll be introduced to utilizing the LM35 temperature sensor alongside the ATmega32 microcontroller. You’ll gain insights into the process of interfacing the temperature sensor with the ATmega32 and displaying the temperature readings on an LCD screen. This tutorial covers displaying temperature values in both Celsius and Fahrenheit. Moreover, you’ll delve into

DIY Temperature Measurement Setup with LM35 Sensor, ATmega32 Microcontroller, and LCD Read More »

Model

Connecting a 16×2 LCD to an ATmega32 AVR Microcontroller in 4-bit mode

Greetings, everyone! I’m here today to share a fascinating and straightforward method for connecting a 16×2 LCD to the Atmega32 microcontroller and writing the necessary code for it. I employed a 16×2 LCD module. The acronym “LCD” stands for “liquid crystal display,” a type of electronic display module utilized in a wide array of devices

Connecting a 16×2 LCD to an ATmega32 AVR Microcontroller in 4-bit mode Read More »

ECE 4760 Final Project CPR Training Dummy on AVR

ECE 4760 Final Project: CPR Training Dummy on AVR

Introduction For our ECE 4760 final project, we implemented an interactive CPR training dummy which can coach the trainees through the CPR process with a LCD to display instructions. The prototype CPR training dummy built is a budget-friendly one that contains a re-programmable Atmel ATmega1284 microcontroller and other hardware components so that it can interact

ECE 4760 Final Project: CPR Training Dummy on AVR Read More »

Interfacing 16x2 LCD with Atmega16 AVR Microcontroller in 4 Bit Mode

Interfacing 16×2 LCD with Atmega16 AVR Microcontroller in 4-Bit Mode

Display is the necessary part of any machine whether it is any home appliance or industrial machines. Display not only shows the control options to operate the machine but also shows the status and output of the task performed by that machine. There are many types of displays used in electronics like 7-segment display, 16×2 LCD display, TFT

Interfacing 16×2 LCD with Atmega16 AVR Microcontroller in 4-Bit Mode Read More »

Block diagram 1

STONE TFT LCD +ESP32 Line Count and Alarm

Brief With the continuous development of single chip microcomputer, the counting equipment tends to be automatic. It needs automatic technical device with real-time, high efficiency and accuracy to meet the counting requirements of modern production line. Through the design of esp32 MCU as the core processor to meet the above requirements, in addition to the

STONE TFT LCD +ESP32 Line Count and Alarm Read More »

Scroll to Top