This is a simple procedure to play PCM audio on any AVR microcontroller. AVR’s high speed PWM is used to play the audio. It almost sound fine and can be used for simple projects that require sound effects. The code is compiled in winavr GCC compiler. The microcontroller used is ATmega32, though any AVR processor […]
PCM Audio Based Door Bell using Atmega32 microcontroller Read More »
STEP 1: Circuit Diagram Components ATmega16 MAX232 0.1uf Capacitor —– 4pcs DB9 Connector 7805 for 5v power supply STEP 2: Programme Code (Compile using Codevision AVR & Burn in Atmega16 ) View C Code STEP 3: Here We have used ADC5 of ATmega16 so connect the signal input in ATmega16 PIN no 35. View
AVR Based CRO using Atmega16 microcontroller Read More »
When I’m fiddling about with electronics I want to be comfortable about it. Therefore I built some things to make by breadboarding life a little simpler. One example is the Network Breadboard Interface. Another one is this little project. These little pcb’s can be put directly into a breadboard and they have the same pinout
Easy Breadboarding using ATMega microcontroller Read More »
This morning (2009-12-31) I built my 4th AVR programmer. USBasp. I built this one because I wasn’t completely happy with my 3rd programmer and because I want to play with a software USB stack. I do know that it works (I just reprogrammed 2 old projects just to try it out. Programming seems to be
Programmer UsbAsp using AVR microcontroller Read More »
The programmer I use is built from a kit I bought at Tuxgraphics. There are several reasons I bought this kit. It is open source, works with avrdude. It connects to USB. It is a lot faster then my old programmer (Programs an ATMEGA8 in about 5 seconds). It is cheap. I bought the kit
Programmer using ATMEGA8 microcontroller Read More »
Designing a professional digital oscilloscope is a pretty complex task wich makes them also pretty expensive. Therefore I concluded it’s nothing more than a daydream to design one of those. It’s far more realistic to limit the design of this instrument to something a bit more realistic. If you connect something like the JYE Tech
Oscilloscope using AVR microcontroller Read More »
LC Meter: Schematic Source code This is the project I am currently working on (2010-01-23). The LC meter is based on Elmcie or Elsie and other similar LC meters. This project is in a very early prototype stage and is at the moment only capable of measuring inductors. Even though I have build the first
LC Meter using AVR microcontroller Read More »
Katja & Guido at Tuxgraphics sell a very affordable little AVR controlled power supply. That power supply can be controlled by sending it commands by I2C. Because I already have a pretty universal network connected to my PC it seems very logical to me to modify the software for that power supply to accept commands
Power Supply using AVR microcontroller Read More »
This is an interesting voltmeter project that display the measured voltage on a TV screen, in giant digits as well as with analog bar. It also records the maximum and minimum values of measurements. The project was built by Alberto Ricci Bitti and was published in the May 1999 issue of Elektor Electonics. The circuit
Turn your TV into a Digital Voltmeter using Atmel’s AVR 90S1200 microcontroller Read More »
This is a digital clock project based on an ATtiny26 microcontroller, displaying time on four seven segment LEDs. The seven segment LEDs glow bright white and are multiplexed through PORTB pins, whereas the segments are driven by PORTA pins. The time is normally shown in hh.mm format but it can be switched to display mm.ss
AVR digital clock with white seven segment LED display using ATtiny26 microcontroller Read More »
