Clock

Firmware Upgrade for USBASP Clone Fixing Error Setting USBASP ISP Clock

Firmware Upgrade for USBASP Clone – Fixing Error Setting USBASP ISP Clock

USBASP is one of the most popular programmer for AVR Microcontroller by Thomas Fischl. It is one of the oldest programmer for AVR. And very common being used with AVRdude software. There are many GUI based on AVRDude, such as: embedXcode AVR8 Burn-O-Mat AVRDUDESS BitBurner avrdude-gui khazama eXtreme Burner and many more In this tutorial we focus […]

Firmware Upgrade for USBASP Clone – Fixing Error Setting USBASP ISP Clock Read More »

EXPERIMENTAL NEXT GENERATION CHIP SCALE ATOMIC CLOCK

EXPERIMENTAL NEXT-GENERATION CHIP-SCALE ATOMIC CLOCK

Physicists at the National Institute of Standards and Technology (NIST) and partners have demonstrated an experimental, next-generation atomic clock—ticking at high “optical” frequencies—that is much smaller than usual, made of just three small chips plus supporting electronics and optics. Described in Optica, the chip-scale clock is based on the vibrations, or “ticks,” of rubidium atoms confined in a tiny

EXPERIMENTAL NEXT-GENERATION CHIP-SCALE ATOMIC CLOCK Read More »

ESPRESSIF ANNOUNCES THE 
RELEASE OF ESP32 S2 SECURE WI FI MCU

ESPRESSIF ANNOUNCES THE 
RELEASE OF ESP32-S2 SECURE WI-FI MCU

Espressif announces the release of the 
ESP32-S2 Secure Wi-Fi MCU, which is a highly integrated, low-power, 2.4 GHz Wi-Fi Microcontroller SoC supporting Wi-Fi HT40 and 43 GPIOs. Based on Xtensa® single-core 32-bit LX7 processor, ESP32-S2 can be clocked at up to 240 MHz. ESP32-S2 is a highly integrated, low-power, 2.4 GHz Wi-Fi Microcontroller SoC supporting

ESPRESSIF ANNOUNCES THE 
RELEASE OF ESP32-S2 SECURE WI-FI MCU Read More »

Introduction to ADC in AVR Microcontroller for Beginners

Introduction to ADC in AVR Microcontroller | for Beginners

In thid tutorial you will know everything ADC in avr microcontroller Step 1: ​What Is an ADC? An ADC, or Analog to Digital Converter, allows one to convert an analog voltage to a digital value that can be used by a microcontroller. There are many sources of analog signals that one might like to measure.

Introduction to ADC in AVR Microcontroller | for Beginners Read More »

AJIT – FIRST EVER “MADE IN INDIA” MICROPROCESSOR DESIGNED BY IIT BOMBAY

AJIT – FIRST-EVER “MADE IN INDIA” MICROPROCESSOR DESIGNED BY IIT BOMBAY

In this modern era, the electronics industry is incomplete without microprocessors. From daily household appliances to space exploration – microprocessors are accompanying us everywhere and making lives way easier. But, independently designing and manufacturing a processor is an extremely complicated task and done by only a few countries like the US, Italy, France, Japan, Taiwan,

AJIT – FIRST-EVER “MADE IN INDIA” MICROPROCESSOR DESIGNED BY IIT BOMBAY Read More »

SECO “SBC C43” MODULE FEATURES CORTEX A72 ENABLED I.MX8 .

SECO “SBC-C43” MODULE FEATURES CORTEX-A72 ENABLED I.MX8.

Seco is developing a 3.5-inch “SBC-C43”, which runs Linux or Android on an up to hexa-core i.MX8, offering up to 8GB soldered DDR4 and 32GB eMMC plus WiFi/BT, 2x GbE, 3x USB, HDMI 2.0 in and out, 2x M.2, and -40 to 85°C support. Seco’s 3.5-inch SBC enables soldered memory and optional industrial temperature support. It’s built

SECO “SBC-C43” MODULE FEATURES CORTEX-A72 ENABLED I.MX8. Read More »

NITROGEN8M MINI IS THE FIRST SBC WITH I.MX8M MINI SOC

NITROGEN8M MINI IS THE FIRST SBC WITH I.MX8M MINI SOC27

Boundary Devices has unveiled its “Nitrogen8M-Mini” SBC, the first SBC that is based on NXP’s new i.MX8M Mini SoC, and also the second embedded board with the first being Variscite’s DART-MX8M-Mini module. The SBC runs Linux on an up to 2GHz, quad -A53 i.MX8M Mini, and offers 2GB RAM, up to 128GB eMMC, PCIe, MIPI CSI/DSI, GbE, and optional

NITROGEN8M MINI IS THE FIRST SBC WITH I.MX8M MINI SOC27 Read More »

Scroll to Top