I love robots. Normally the ones I build are quite large and wouldn’t fit in your pocket, but for a change of pace I decided I would try something small and fun! This robot is exactly that, and in fact fits inside of an altoids tin. It is inexpensive, versatile (so many different sensors can […]
Tiny Altoid Tin Robot With Personality Read More »
Essentially another tutorial involving controlling DC motors. In this post I’m going to first alter a robot arm I had built previously from a beginners kit so that it can be controlled from Arduino. Then I’m going to write a series of posts on different ways to control the robot arm using Processing and other
Arduino – Modifying a Robot Arm using ATmega328 Read More »
Here is my Chronos watch controlled rover. The rover has a CC1110 minikit that receives SimpliciTI messages from the watch and sends this to an Arduino (AVR) over serial. The Arduino controls the motors and the servo controlling the robot arm. I have called this thing a robot, which is not strictly correct, as a
Watch controlled robot using AVR microcontroller Read More »
Concept The customer’s demands were to develop and build a kit, consisting of a small mechatronic system with educational concept. In particular, he asked for a driverless robot for training purposes abroad. The idea behind this is that our customer needs a kit for sending it to partner schools around the world to help the
Remote Control based Robot using C language Read More »
A very interesting robot project screens being pencelerelerdeki içintasarlanmış cleaner cleaning robot brain of the system atmel microcontroller at90ls8535 given to software source c. Robot useful source software project, especially in parts of uygulayamasanızda circuit h-bridge motor drive section is hyperlinked mosfetli driver stage. For more detail: Flapper cleaning robot atmel at90ls8535 insect robot
Flapper cleaning robot atmel at90ls8535 insect robot Read More »
In this tutorial we will discuss a simple PC controlled robot. The Robot PC link will be a RS232 serial line. The robot will have only five commands. Move forward (RS232 char ‘F’ or ‘f’) Move backward (RS232 char ‘B’ or ‘b’) Turn Left (RS232 char ‘L’ or ‘l’) Turn Right (RS232 char ‘R’ or
PC Controlled Robot using ATmega32 Read More »
One of the most basic autonomous robot you can build is a line following robot(LFR). This type of robot is run over a white surface which has an arbitrary path drawn over it by using back paint. The task of the robot is to run exactly along this painted path. You may note that the
Line Following Robot using AVR ATmega8 Read More »
Portland, OR (PRWEB) October 1, 2009 RoboTier provides a new level of capabilities and performance — all with no robot programming. Robot palletizing has become an increasingly accepted alternative to traditional layer palletizing, but the solution is not without challenges. Typical robot palletizing experiences limits on products that can be handled, performance issues with deviations
(Phys.org) — Researchers from the Institute for Advanced Architecture of Catalonia have built a programmable robot arm with a nozzle for a hand that allows for building structures out of sand mixed with water and binding agents, using a 3D printing technique. The result, called the Stone Spray Robot, was built by architects Inder Shergill, Anna Kulik and Petr Novikov, and is a part of the Stone Spray Project, whose purpose is to illustrate the concept of making habitual structures from earth friendly materials.
Researcher use robot arm to print 3D sand structures Read More »
Boisbriand, Quebec (PRWEB) December 24, 2008 RobotShop, the World’s Leading Source for Domestic and Professional Robot Technology, unleashes the RobotShop Robot Rover, the first ever development platform for the Arduino USB microcontroller. The RobotShop Robot Rover, which was designed in-house by the RobotShop Learning Center, is a low cost and versatile platform for robot hobbyists,
Robot Rover Development Platform for Arduino Unleashed by RobotShop Read More »
