treet lights are controlled manually in olden days. These days automation of street lights has emerged. But one can observe that there is no need of high intensity in peak hours i.e. when there is no traffic and even in early mornings. By reducing the intensity in these times, energy can be saved to some […]
Auto Intensity Control of Street Lights Read More »
Street lights are switched on depending on the intensity of the Sun light on LDR. If the intensity of Sunlight on light dependent resistor is low, its resistance value is high. This value increases and becomes high when it is completely in dark. This resistance value decides when the street lights are required to switch
Street Lights that Glow on Detecting Vehicle Movement Read More »
As the non renewable energy resources are decreasing, use of renewable resources for producing electricity is increasing. Solar panels are becoming more popular day by day. We have already read a post about how to install solar panel for home. Solar panel absorbs the energy from the Sun and is stored in the battery. This
Sun Tracking Solar Panel Read More »
Biometrics is the emerging technology used for identification. Biometric refers to automatic identification of a person based on biological characters such as finger print, iris, facial recognition, etc. In this article finger print based attendance system is proposed. Attendance in educational institutions, industries will require more paper work and time. To reduce this, automatic attendance
Biometric Attendance System Circuit Read More »
A photocell or photo resistor is a Light Dependent Resistors (LDR). LDR’s are sensors that detect light. They are small, inexpensive, low-power, easy to use and don’t wear out. Overview A photocell or photo resistor is a Light Dependent Resistors (LDR). LDR’s are sensors that detect light. They are small, inexpensive, low-power, easy to use
Introduction “An ultrasonic range-finding hat with variable haptic feedback for obstacle detection.” -Project Sound Bite For our ECE 4760 final project, we designed and implemented an ultrasonic range-finding hat that uses haptic feedback to alert its wearer about obstacles in his or her path. The hat is equipped with an ultrasonic transmitter/receiver circuit, which is
The Bat Hat Using Atmega1284 Read More »
Introduction: Our final project for the ECE 4760 course consists of a wearable device to provide aid for the visually impaired. An ultrasonic distance sensor located on a hat collects data of the surrounding environment scanning the area ahead of the user, and uses this data to give an audio feedback through stereo headphones. Using
Ultrasonic Pathfinder Using Atmega1284 Read More »
Our acoustic wayfinding device utilizes ultrasonic range finders and haptic feedback to facilitate indoor navigation for the visually impaired. The technique of acoustic wayfinding uses auditory cues, such as sounds from the natural environment or sounds created artificially, to determine an individual’s surrounding physical space for the purpose of navigation. Our device is an automated
Acoustic Wayfinder Using Atmega1284 Read More »
Introduction “A device that tracks sound impluses with a three microphone array” We designed and build a 2-dimentional Acoustic Impulse Marker system which is capable of detecting a sharp sound anywhere in its vicinity and precisely marking its source vector with a servo based pointer. Our system has a full 360 degree range, and is
Acoustic Impulse Marker Using Atmega1284 Read More »
This webpage describes the development of a Stabilized Gimbal Control System for the CUAir team, Cornell University’s Unmanned Air Systems Team. The Stabilized Gimbal Control System will help the CUAir team compete at the Association for Unmanned Vehicle System International (AUVSI) Student Unmanned Air Systems (SUAS) Competition. The system developed will help the team accomplish
Stabilized Gimbal System Using Atmega1284 Read More »
