Introduction The AVRISP looks just like the JTAGICE, except it’s a bit smaller and it has a 6-pin connector on the end of the cable instead of the 10-pin connector on the JTAGICE. The AVRISP programmer does not have the advanced debugging features of the JTAGICE, but it still allows you to load your program […]
Using the AVRISP Programmer Read More »
Introduction The Chipcon (now owned by Texas Instruments) CC2420 is a commercial radio chip that complies with the ZigBee wireless standard. We have CC2420DBK development kits available for your project. Each development kit comes with 2 development boards (2 radios). Each development board has a Chipcon CC2420 radio, an Atmel Atmega128L microcontroller, 32kB of external RAM, an
This project shows you how to build your own I2C DC motor drive using a DigiSpark Attiny85 plus Arduino motor shield. To test its operation, I made a small RC car which used an M5StickC & connected to Blynk App. to communicate with this drive via the I2C protocol. Please check my introduction video before getting started.
I2C Blynk Car With Attiny85 and M5StickC Read More »
Ok first of all this was a final project for my microprocessor course in my University, and its intended to clarify and guide to someone has a similar project or just want to do it and learn , since when i was doing this project it wasn’t so easy to find the information and examples
Car Datta Logger Using OBD II Protocol (atmega 2560+ SD Card + Lcd 16×2) Read More »
Paper Pocket Pets (PPP) is a kit designed to create interactive modular and wearable toys. It encourages children’s movement and sociality thanks to the reactions of the pet and allows children to build their own representative pet and also to change it over time if they want. Interaction dynamics The pets are designed to be
We see in all house we have calling bells. We go and search for the switch and Ring the bell. IF no one is in home we don’t know it and ring the bell again and again. To over come that in this project i make Intelligent Calling Bell. Which sense the incoming person coming
Intelligent Calling Bell Read More »
Objective: Build a cheap and easy tool to help people with disabilites to better communicate their basic needs. Materials: – Makey Makey – Used box – my box is 6.5 x 3.5″, but you can use a box bigger than that if you want. – 8 Connector wires – Momentary buttons ( Amazon Link ) – Tape – Baking
Assistive Technology for People With Communication Disabilities Using Makey Makey Read More »
Universal transmitter to control everything! One transmitter to rule them all. The Devo 10 is a programmable radio transmitter from Walkera. When Deviation is installed with a couple of RF modules, it can almost replace every transmitter for your RTF micro multi-rotors/quadcopters/helicopters and planes. In this video, I show how to mod it with a
Walkera Devo 10 Radio Transmitter Deviation Mod – Control Everything! Read More »
Okay, I admit I don’t have a monkey. But would you be looking at this if I didn’t mention monkey? And this would work for a monkey. Does your monkey or dog wander off? Would you like to see where he/she is? Well, they make dog trackers (see picture). However, most are over $100 and
In this project we are going to increment seven segment display value using push button with 8051 microcontroller. Step 1: Software Used: As we are showing proteus simulation so FOR CODING AND SIMULATION YOU REQUIRED: 1 Keil uvision: Their are lots of product from keil. so you will be required c51 compiler. You can download that
Incrementing 7 Segment Value Using Push Butoon With 8051 Read More »
