Driver

ICL88XX FAMILY OF SINGLE STAGE FLYBACK CONTROLLERS HAVE CONSTANT VOLTAGE OUTPUT

ICL88XX FAMILY OF SINGLE-STAGE FLYBACK CONTROLLERS HAVE CONSTANT VOLTAGE OUTPUT

Cost-effective dimmable and intelligent LED systems are expected to increase the market share disproportionately in the coming years. Introducing the ICL8800, ICL8810 and ICL8820 single-stage flyback LED controllers for constant output voltages, Infineon Technologies AG addresses the need of LED driver manufacturers in this regard. With their unique features, the ICs meet the necessary performance requirements for LED lighting applications, such as LED drivers […]

ICL88XX FAMILY OF SINGLE-STAGE FLYBACK CONTROLLERS HAVE CONSTANT VOLTAGE OUTPUT Read More »

TEXAS INSTRUMENTS DRV8212 12V 2A LOW VOLTAGE H BRIDGE MOTOR DRIVER

TEXAS INSTRUMENTS DRV8212 12V, 2A LOW VOLTAGE H-BRIDGE MOTOR DRIVER

Texas Instruments DRV8212 12V, 2A Low Voltage H-Bridge Motor Driver provides PWM, PH/EN, and half-bridge control interfaces and low-power sleep mode. The DRV8212 Motor Driver is integrated with four N-channel power FETs, a charge pump regulator, and protection circuitry. The triple charge pump architecture allows the device to operate down to 1.65V to accommodate 1.8V supply rails and low-battery

TEXAS INSTRUMENTS DRV8212 12V, 2A LOW VOLTAGE H-BRIDGE MOTOR DRIVER Read More »

Controlling Angular Position of Servo Motor using Pulse Width Modulation

Interfacing Servo Motor with Atmega32 Microcontroller

A Servo Motor is a type of DC Motor that incorporates error sensing negative feedback to precisely regulate the angular position of its shaft. Unlike standard DC Motors, servo motors do not rotate continuously but instead perform controlled angular rotations, such as 0-90° or 0-180°. While Stepper Motors can also achieve accurate angular rotations, Servo

Interfacing Servo Motor with Atmega32 Microcontroller Read More »

XD9260 61 – 1.5A HI SAT COT SYNCHRONOUS STEP DOWN DC DC CONVERTER

XD9260/61 – 1.5A HI-SAT COT SYNCHRONOUS STEP-DOWN DC/DC CONVERTER

XD9260/61 – 1.5A Hi-SAT COT Synchronous Step-Down DC/DC Converter, AEC-Q100 compliant The XD9260/XD9261 series is a small 1.5A synchronous step-down DC/DC converter with high-speed transient response and low quiescent current. The extremely fast load transient performance is a result of Torex’s innovative Hi-SAT COT (Constant On-Time) control method, which, when compared to standard Constant On-Time

XD9260/61 – 1.5A HI-SAT COT SYNCHRONOUS STEP-DOWN DC/DC CONVERTER Read More »

AMS INTRODUCES WORLDS FIRST AEC Q102 AND ISO 26262 COMPLIANT VCSEL FLOOD ILLUMINATOR

AMS INTRODUCES WORLD’S FIRST AEC-Q102 AND ISO 26262 COMPLIANT VCSEL FLOOD ILLUMINATOR

ams announced the pre-release of the new TARA2000-AUT family of VCSEL (Vertical-Cavity Surface-Emitting Laser) flood illuminators for automotive applications. According to the company, the TARA2000-AUT flood illuminators are the industry’s first to be qualified to the AEC-Q102 automotive quality standard and the ISO 26262 functional safety standard. The TARA2000-AUT products are ideal for new optical in-cabin sensing (ICS) systems based on 2D NIR imaging or 3D time-of-flight sensing

AMS INTRODUCES WORLD’S FIRST AEC-Q102 AND ISO 26262 COMPLIANT VCSEL FLOOD ILLUMINATOR Read More »

OAX8000 ASIC AI ENABLED PROCESSOR FOR DRIVER MONITORING SYSTEMS

OAX8000 ASIC AI-ENABLED PROCESSOR FOR DRIVER MONITORING SYSTEMS

OAX8000 is an automotive ASIC optimized for dedicated DMS (Driver Monitoring Systems). The ASIC comes with a stacked-die architecture with multiple layers of ICs that offers on-chip DDR3 SDRAM memory (1GB). It also features a fast AI video processor with CNN (Convolutional Neural Network) accelerator and works as a low-power device. The automotive image sensors have a power rating of 1

OAX8000 ASIC AI-ENABLED PROCESSOR FOR DRIVER MONITORING SYSTEMS Read More »

TEXAS INSTRUMENTS UCC27288 HALF BRIDGE DRIVER

TEXAS INSTRUMENTS UCC27288 HALF-BRIDGE DRIVER

Texas Instruments UCC27288 Half-Bridge Driver is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3.5A peak sink current and 2.5A peak source current, along with low pull-up and pull-down resistance, allows the UCC27288

TEXAS INSTRUMENTS UCC27288 HALF-BRIDGE DRIVER Read More »

DRV8428 35 V 1 A BIPOLAR STEPPER MOTOR DRIVER

DRV8428 35 V, 1 A BIPOLAR STEPPER MOTOR DRIVER

Texas Instruments’ driver features integrated current sense, 1/256 microstepping, STEP/DIR interface, and smart tune technology Texas Instruments’ DRV8428 is a stepper motor driver for industrial and consumer applications. The device is fully integrated with two N-channel power MOSFET H-bridge drivers, a microstepping indexer, and integrated current sensing. The DRV8428 can drive up to 1 A full-scale output

DRV8428 35 V, 1 A BIPOLAR STEPPER MOTOR DRIVER Read More »

STMICROELECTRONICS STEVAL PTOOL1V1 BLDC MOTOR DRIVER FOR BATTERY POWERED APPLICATIONS

STMICROELECTRONICS STEVAL-PTOOL1V1 BLDC MOTOR DRIVER FOR BATTERY-POWERED APPLICATIONS

Due to continuous developments in power electronics and advanced semiconductor devices, the brushless DC motor (BLDC), also known as the electronically commuted motor, is seen in commercial and industrial applications. If you are looking for a brushless motor design, this might aid your requirements. The STEVAL-PTOOL1V1 from STMicroelectronics is based on the STSPIN32F0B controller, which is an advanced

STMICROELECTRONICS STEVAL-PTOOL1V1 BLDC MOTOR DRIVER FOR BATTERY-POWERED APPLICATIONS Read More »

STMICROELECTRONICS STEVAL LLL009V1 DIGITALLY CONTROLLED POWER SUPPLY

STMICROELECTRONICS STEVAL-LLL009V1 DIGITALLY CONTROLLED POWER SUPPLY

STMicroelectronics STEVAL-LLL009V1 Digitally Controlled 300W Power Supply consists of power factor correction (PFC) and half-bridge LCC resonant converter power stages. An STM32F334R8 microcontroller implements DC-DC and output synchronous rectification digital control, while the PFC is driven in transition mode by the L6562AT controller. To ensure maximum efficiency, MDmesh K5 and MDmesh DK5 Power MOSFETs are used in

STMICROELECTRONICS STEVAL-LLL009V1 DIGITALLY CONTROLLED POWER SUPPLY Read More »

Scroll to Top