lcd

Led Animation Circuit with PC Connectivity using AT90S2313 microcontroller

Animator is a device, rather 5 × 16 matrix LED , which are used to display simple animation. Initially, the device serves to something completely different and it was controlled directly from the parallel port for the program is written in Pascal. The idea has proved to be a bit pointless because the program does not provide an even […]

Led Animation Circuit with PC Connectivity using AT90S2313 microcontroller Read More »

Color Sensor Circuit with AT89S52 ADC0808

This color of the surface color to red when you bring to the surface, a sensor to read the LDR, yellow, blue.Red, yellow and blue lights in different surface finishes as a different yansıtmalarını works by taking a foothold. Will be reflected from the surface to send 3 ledlights, this ledlerin to read the value of LDR,

Color Sensor Circuit with AT89S52 ADC0808 Read More »

Serial interface with 2X16 LCD display using ATMega8515 microcontroller

The 10k potentiometer, just above the ISP connector near the lower middle of the board, is used to adjust the display contrast according to your vertical viewing angle. DOWNLOADS ATTINY2313/AT90S2313 AVRStudio assembler source. LDCbutons040904Ca.htm ATTINY2313/AT90S2313 AVRStudio assembler source. UPDATED FOR COMPATIBILITY WITH NEWER VERSIONS OF THE ASSEMBLER. LDCbutons040904C_updated_a.htm Truly LCD driver include file.  2x16lcdinc.htm tlcd309Ba.htm

Serial interface with 2X16 LCD display using ATMega8515 microcontroller Read More »

G1216B1N000 dot graphics display using AT90S2313 microcontroller

Download Assembler source code I was looking for an LCD display that I could use to display waveforms on the workbench. The selection criteria for the display module itself was straight forward: 1. Dot graphic with sufficient resolution to display a simple waveform, 2. Available for fast delivery, 3. Have sufficient documentation available online to

G1216B1N000 dot graphics display using AT90S2313 microcontroller Read More »

LCD Date Time Application using AT89S52 microcontroller

This application can be installed at the same time an alarm indicating the date and time produced by Atmel with 8051 -based microcontroller AT89S52 tasarlanmıştır. Uygulamamızın using the Keil compiler using the C programming language using codes written in different types of intervention. Proteus simulation of the application program, Isis has been part of the program

LCD Date Time Application using AT89S52 microcontroller Read More »

Atmel Test Card using ATmega32 microcontroller

PCB and the schema (sch) P-CAD 2004 Schematic drawings prepared by V18.00.2690 also c languagecode through the test has been prepared with an alternative link. ATMEGA-32 Development Board Power 7V to 12V (4mm sockets) protected against reverse polarity Visualization by 8 LEDs Statements of eight logic outputs (your choice according the HE10 connector wiring entry

Atmel Test Card using ATmega32 microcontroller Read More »

PWM Waveform Capture using AVR microcontroller

Described are the waveform capture method, example firmware and hardware designs. This material formed the basis of an article that was first published in the October, 2003 issue of Circuit Cellar magazine. The only components added to the operating Atmel AT90S2313 circuit (one capacitor and two resistors) to allow  waveform sampling with < 1 microsecond resolution

PWM Waveform Capture using AVR microcontroller Read More »

89C517 Segment Display using the Digital Time

Data from Port0 7447 entegresinde and 7-segment displayreaches ‘ s.7447 -integration mikrodenetleyiciden from binary code to show in the 7 segment displayis used. So when it comes to 0000 a, b, c, d, e, f LEDs lights up g edi fireproof.7 segment displayis connected in parallel to each other ‘ s.Using the same data path to the parallel 7 segment display 7-segment display at

89C517 Segment Display using the Digital Time Read More »

Scroll to Top